
Join us in the
BETA CAE Systems
2021 North America Online Open Meeting
December 7-8, 2021
BETA CAE Systems International AG, a leading contemporary industry supplier of CAE software, and its subsidiary in the United States, BETA CAE Systems USA, have the pleasure to invite you to the 2021 North America Online Open Meeting.
This online event will take place on December 7th and 8th, 2021, at 11.00am – 4.30pm EST (Eastern Standard Time).
BETA CAE Systems International AG is excited to announce Jonathan Pandolfini, Ph.D. from Oshkosh Corporation as our keynote speaker, who will be presenting Product Management and Process Simplification Application for Structural Analysis. Satya S. Vallurupalli Ph.D. from Lucid Motors, Ovidiu Moraru from Mahindra Automotive North America, Lucas Agricola from Corvid Technologies will be also presenting their latest application of our software.
During this event you will be updated on some of the latest developments of BETA CAE Systems Software suite. Each presentation and demo will start at the designated time so that you could focus on the parts of your interest.
There is no participation fee for the event.
Preliminary Agenda
Tuesday December 7
EST (Eastern Standard Time)
11:00 |
- |
11:15 |
Welcome Remarks |
11:15 |
- |
11:45 |
Product Management and Process Simplification Application for Structural Analysis |
11:45 |
- |
12:30 |
ANSA What's New v22.0 |
12:30 |
- |
13:00 |
META What's New v22.0 |
13:00 |
- |
13:30 |
2-Minute Suspension model update and Rapid fast kinematic assembly CAE Tool |
13:30 |
- |
14:00 |
Optimwelds - Mahindra's Strategic Approach to Optimize Welds for Fatigue and Strength Performance |
14:00 |
- |
14:30 |
ANSA for High Fidelity CFD Mesh Generation |
14:30 |
- |
15:00 |
ANSA/META for CFD What's New v22.0 |
15:00 |
- |
15:30 |
BETA Services |
15:30 |
- |
16:00 |
Volume Modularity for CFD |
16:00 |
- |
16:20 |
Machine Learning in Feature Detection |
Wednesday December 8
EST (Eastern Standard Time)
11:00 |
- |
11:30 |
DEEN: The environment that redefines product evolution cycles in Simulation Driven Design |
11:30 |
- |
12:00 |
Ground breaking developments in ANSA meshing capabilities |
12:00 |
- |
12:30 |
Showcasing ANSA meshing capabilities |
12:30 |
- |
13:00 |
ECAD Importer: A gateway to FEA simulations for PCBs |
13:00 |
- |
13:20 |
Latest developments in Machine Learning for Model behavior prediction |
13:20 |
- |
13:50 |
Latest Solutions for Modular Run Management |
13:50 |
- |
14:20 |
Morphing, Optimization and Concept Development |
14:20 |
- |
14:40 |
Latest Solutions for Crash worthiness |
14:40 |
- |
15:10 |
Latest Solutions for Safety |
15:10 |
- |
15:40 |
Latest Solutions for Durability |
15:40 |
- |
16:00 |
Latest Solutions for NVH |
16:00 |
- |
16:20 |
Pre- and post-processing for Acoustic analysis in ACTRAN |
InformationEmail: naom2021@ansa-usa.com |
||